โJan-18-2020 06:00 AM
โJan-19-2020 08:14 AM
โJan-19-2020 04:59 AM
โJan-18-2020 07:51 PM
โJan-18-2020 05:51 PM
โJan-18-2020 05:51 PM
Hammerboy wrote:
In general traffic I doubt you would ever need a slider with todays cut corner cap fifth wheels. Maybe when backing in a tight site but I try my best not to cut super sharp anyway because of the twisting and scrubbing it does to the fifth wheel tires. But every fifth/truck combo is different, as for me I have plenty of room.
I do however have a manual B&W slider and the only reason I have one is because I have a steep hill I have to back down to get to the barn and this provides a steeper angle without hitting the tailgate when backing down. Hope that made sense.
Had a Pullrite auto slider for about 5 years on a previous fifth wheel years ago and to be honest I didn't really care for it. I had too many times where I had to separate the head from the rest of the unit just to unhitch plus I was always cleaning and greasing the slide bars. Plus in my situation it wouldn't work for my needs.
Dan
โJan-18-2020 02:22 PM
spud1957 wrote:smithrhjr wrote:
spud1957 Pullrite and B&W do not have auto sliders for the 2020 chvey YET. They are working on it, but no timeline.
He does not have the hitch pucks as stated in his other closed thread.
โJan-18-2020 02:00 PM
smithrhjr wrote:
spud1957 Pullrite and B&W do not have auto sliders for the 2020 chvey YET. They are working on it, but no timeline.
โJan-18-2020 01:20 PM
โJan-18-2020 12:56 PM
โJan-18-2020 12:40 PM
โJan-18-2020 12:30 PM
โJan-18-2020 11:14 AM
โJan-18-2020 09:13 AM
โJan-18-2020 09:02 AM