navegator wrote: If the Flux capacitor is to close to the fenorck pin and some caulk gets on them you might have a severe discharge of re-ionized flux, it is better to use some chinking.
navegator
Sorta gotta go with him on this one, there is now way to know what advancements will be made in caulk between now and 3011 so it would be a be well premature to recommend anything. What do the 3011 rigs look like? What materials are they made out of? Some sort of organic coploymer i'm sure. :B
If the Flux capacitor is to close to the fenorck pin and some caulk gets on them you might have a severe discharge of re-ionized flux, it is better to use some chinking.
I used Geocel 2300 on siding seams and around windows and doors. Inside, I used a lot of GE Elastomeric I had on hand but I'd guess any household caulk would work. The sealants with antimicrobial additive may be a good candidate for the bath and around the kitchen sink.
Inside the RV? Anything you would use in your own house or bathroom. Typically any brand of silicon.
Exterior? I've tried a good number and find I prefer Dicor sefl-leveling as well as their non-leveling formula for vents and windows on the sidewalls.
More unique for my camper are the fender skirts. Nothing would adhere to both the fiberglass wall and the plastic skirt and water would sneak in past the skirt and into the camper. Until I tried 3M windshield urethane. WOW. That stuff is amazing.
