Nov-03-2017 07:24 AM
Nov-07-2017 04:50 AM
mkirsch wrote:
Yup, heating mattress pads are great if you want to lay there and listen to the drone of the generator all night, or wake up to dead batteries...
You guys think that just running the pad a little bit before bed is going to solve this, but you don't understand that the heat transfer is happening any time there is a hot side and a cold side. The heat will be constantly sucked out of the bed, and will need to be replenished constantly to keep the bed comfortable.
That means the heating pad will need to run all night, which is not practical unless you have power. If I read my TC owner's club membership manual right, we are obligated to look down our noses disparagingly at anyone who would waste such a wonderful resource as a TC by staying in a c... c... c... campground.
Nov-07-2017 04:35 AM
Nov-06-2017 08:48 PM
2oldman wrote:
Get a heating mattress pad. It's nice getting into a warm bed.
Nov-06-2017 07:35 PM
Nov-06-2017 07:26 PM
Nov-04-2017 12:02 PM
Nov-04-2017 09:29 AM
Nov-04-2017 09:01 AM
GeoBoy wrote:magic43 wrote:
Electric "trucker's" pad. We have the 120 VAC model which we turn on ~30 minutes before bedtime. It is toasty warm when we slice in. They also make/sell a 12 VDC model.
We just spent two weeks camping at 9800' in Colorado when the nitetime temp got down to 10 degrees a few nights. We set the RV thermostat at 40 degrees and we were warm.
40 degrees!! It’s at least 60 degrees at night, in the camper, or I will find a nice hotel to stay at. This RV thing is supposed to be about enjoyment and comfort.:B
Nov-04-2017 08:30 AM
magic43 wrote:
Electric "trucker's" pad. We have the 120 VAC model which we turn on ~30 minutes before bedtime. It is toasty warm when we slice in. They also make/sell a 12 VDC model.
We just spent two weeks camping at 9800' in Colorado when the nitetime temp got down to 10 degrees a few nights. We set the RV thermostat at 40 degrees and we were warm.
Nov-03-2017 07:13 PM
Nov-03-2017 07:07 PM
Nov-03-2017 07:00 PM
Nov-03-2017 06:22 PM
Nov-03-2017 05:11 PM