Jul-24-2021 06:40 PM
Jul-27-2021 02:53 PM
Devo the dog wrote:spoon059 wrote:valhalla360 wrote:
1600lb payload vs 2700lb payload
CTD vs V10... .
Only CTD owners believe that the engine is the only item that matters in a truck.
And that's why the trucks are substandard. The manufacture knows the type of customers that repeatedly buy their future spot welds because the only thing that matters is the CTD.
LOL.
Jul-27-2021 02:50 PM
Jul-27-2021 02:00 PM
n0arp wrote:valhalla360 wrote:n0arp wrote:
Also that payload capacity indicates, in this case, that the Ford is 1000lbs lighter -- a heavier truck (to be fair, this is a 100% anecdotal claim I've read online, which my personal experience seems to agree with) tends to handle a heavy trailer better in adverse conditions. Much less so with a fifth wheel than a travel trailer, but still...
Wow, the Dodge curb weight runs 8500lb? That's insane. I'm sure it will pull a 5000lb 5th wheel great because it's so much heavier than the trailer.
3/4T trucks are sold as class 2b, which is limited to 10K GVWR (for tax/registration purposes). The Ram is most likely heavier due to the optioning, not just the engine. The Ford could easily be just as heavy with the right trim. GVWR - weight = payload. Edit: found your Ford is a 2008, which easily explains the rest of the difference as all three competitors have gained weight in newer generations.
Fortunately for most owners, they also provide axle weight ratings, which are not artificially capped. You will find the majority of newer 3/4Ts pulling fifth wheels are over GVWR, but a lot of them still under axle ratings. A 6500 RAWR on the Ram leaves around 3K to spare, where all the pin weight sits, without going over either of the axle ratings. So do what you want with that information.
You have a 2008. Newer trucks have grown in almost all metrics, but still have the same 10K cap for class 2b (your truck might even be lower due to the year). The 2016 Ram would most certainly handle any trailer better than your 2008 Ford.
Jul-27-2021 08:43 AM
SirKeats wrote:
So I have a 2016 Ram 2500 Megacab with the 6.7 Cummins. I love it. Great truck.
The problem is that the payload capacity is absolutely horrible at only 1637lbs!!
That said, is there anything that can be done to increase the payload capacity?
Thanks!
Jul-27-2021 07:05 AM
valhalla360 wrote:n0arp wrote:
Also that payload capacity indicates, in this case, that the Ford is 1000lbs lighter -- a heavier truck (to be fair, this is a 100% anecdotal claim I've read online, which my personal experience seems to agree with) tends to handle a heavy trailer better in adverse conditions. Much less so with a fifth wheel than a travel trailer, but still...
Wow, the Dodge curb weight runs 8500lb? That's insane. I'm sure it will pull a 5000lb 5th wheel great because it's so much heavier than the trailer.
Jul-27-2021 06:41 AM
spoon059 wrote:valhalla360 wrote:
1600lb payload vs 2700lb payload
CTD vs V10... .
Jul-27-2021 04:36 AM
n0arp wrote:
Also that payload capacity indicates, in this case, that the Ford is 1000lbs lighter -- a heavier truck (to be fair, this is a 100% anecdotal claim I've read online, which my personal experience seems to agree with) tends to handle a heavy trailer better in adverse conditions. Much less so with a fifth wheel than a travel trailer, but still...
Jul-27-2021 04:34 AM
spoon059 wrote:valhalla360 wrote:
1600lb payload vs 2700lb payload
CTD vs V10... I'd argue that the Ram will pull it better, the exhaust brake will control it better going down hill. I'm trying to remember the last year Ford put a V10 in the Superduty, probably a decade ago? What is the rear axle rating on that F250, compared to the 6500 lbs rear axle rating on the Ram 2500?
You are too focused on an arbitrary advertising number (10,000 lbs GVWR) rather than the actual functionality of the whole truck. But hey, to each his own.
Jul-26-2021 03:52 PM
spoon059 wrote:valhalla360 wrote:
1600lb payload vs 2700lb payload
CTD vs V10... I'd argue that the Ram will pull it better, the exhaust brake will control it better going down hill. I'm trying to remember the last year Ford put a V10 in the Superduty, probably a decade ago? What is the rear axle rating on that F250, compared to the 6500 lbs rear axle rating on the Ram 2500?
You are too focused on an arbitrary advertising number (10,000 lbs GVWR) rather than the actual functionality of the whole truck. But hey, to each his own.
Jul-26-2021 03:36 PM
valhalla360 wrote:
1600lb payload vs 2700lb payload
Jul-26-2021 11:37 AM
Grit dog wrote:So 16936 * 20% = 3387 pin weight calculated - you should listen to this advice - which is basically telling you to upgrade the truck
OP, if you don’t understand vehicles and their components and don’t wish to, just go get a dually like some think is “necessary.”
If you want to keep your truck, I wouldn’t think twice about dropping any pin up to about 3,000lbs on it.
The for and against banter will continue.
Jul-26-2021 09:08 AM
valhalla360 wrote:spoon059 wrote:valhalla360 wrote:
We have a F250 and it has a 2700lb payload. No it's not going to handle a 15k 5th wheel but way better than the OP's 1600lb.
Better? Based upon what metrics?
1600lb payload vs 2700lb payload
Jul-26-2021 08:38 AM
Jul-26-2021 03:49 AM
spoon059 wrote:valhalla360 wrote:
We have a F250 and it has a 2700lb payload. No it's not going to handle a 15k 5th wheel but way better than the OP's 1600lb.
Better? Based upon what metrics?
Jul-25-2021 06:25 PM
SirKeats wrote:Another tow rating victum.
So I have a 2016 Ram 2500 Megacab with the 6.7 Cummins. I love it. Great truck. It has plenty of tow capacity for us and our current trailer and possible future 5th Wheel upgrade at 16,936lbs.
The problem is that the payload capacity is absolutely horrible at only 1637lbs!!
We're looking to upgrade from our TT to a slightly larger (like 4 extra feet) 5th Wheel at some point, and after taking into account our family (people/pets) and what little cargo we carry in the truck, I'd need a pin weight of like 1000lbs to say within spec!! I checked... not gonna happen.
That said, is there anything that can be done to increase the payload capacity? I can easily stay under the tow/trailer capacity, I just need to be able to increase the pin weight capacity.
Like I said, I really like my truck. Would hate to have to up-size just to get a 5th wheel.
Thanks!