Oct-31-2015 08:10 PM
Nov-02-2015 05:02 PM
Nov-02-2015 04:22 PM
2004.5 Ram SLT LB 3500 DRW Quad Cab 4x4
1988 Bigfoot (C11.5) TC (1900# w/standard equip. per decal), 130 watts solar, 100 AH AGM, Polar Cub A/C, EU2000i Honda
Toad: 91 Zuke
Nov-02-2015 02:57 PM
jimh425 wrote:zulu52 wrote:
My TC sways a lot because of the top heavy load. Would this fix that problem?
Do I need hockey pucks?
Zulu
Maybe just less air if you run air bags.
Nov-02-2015 02:28 PM
zulu52 wrote:
My TC sways a lot because of the top heavy load. Would this fix that problem?
Do I need hockey pucks?
Zulu
Nov-02-2015 02:03 PM
Nov-02-2015 12:37 PM
Nov-01-2015 02:28 PM
2004.5 Ram SLT LB 3500 DRW Quad Cab 4x4
1988 Bigfoot (C11.5) TC (1900# w/standard equip. per decal), 130 watts solar, 100 AH AGM, Polar Cub A/C, EU2000i Honda
Toad: 91 Zuke
Nov-01-2015 02:05 PM
Nov-01-2015 01:13 PM
Nov-01-2015 08:35 AM
Nov-01-2015 08:26 AM
2004.5 Ram SLT LB 3500 DRW Quad Cab 4x4
1988 Bigfoot (C11.5) TC (1900# w/standard equip. per decal), 130 watts solar, 100 AH AGM, Polar Cub A/C, EU2000i Honda
Toad: 91 Zuke
Nov-01-2015 08:15 AM
Nov-01-2015 08:04 AM
RWDIII wrote:
I have what I call half stableloads on the back part of the rear springs
made with the round spacer that came with the work rites.
they cause both ends of the overload to contact the springs,but don't lift the truck.I will take a pic if anyone is interested.Since I had them in the garage the cost was 2 bolts and two muffler clamps,about $10 .
Nov-01-2015 07:55 AM
Nov-01-2015 07:53 AM