โJul-01-2015 09:07 PM
โJul-05-2015 07:42 PM
โJul-05-2015 08:14 AM
โJul-03-2015 01:56 PM
โJul-03-2015 12:31 PM
randallb wrote:
Shark-bites, et al are not normally used by plumbers/contractors because of price. You buy the crimping tool and dies once and then crimp all of your joints for substantially less. For example; $5.85 for a brass SB 1/2"- 90 or $.75 for a PEX brass 1/2"-90 and $.14 for the clamp. $5.85 or $.89? I know what my choice is since I already own the (approx $100.00) crimping tool and dies.
Randy
โJul-03-2015 09:32 AM
โJul-03-2015 04:49 AM
โJul-02-2015 08:39 PM
โJul-02-2015 08:24 PM
โJul-02-2015 06:44 PM
zman-az wrote:
Why not use the less expensive plastic ones. Check out the video at around 1 minute.
โJul-02-2015 04:06 PM
โJul-02-2015 03:48 PM
โJul-02-2015 11:48 AM
โJul-02-2015 05:06 AM
โJul-02-2015 05:03 AM