โJan-26-2021 06:00 PM
โFeb-25-2021 07:27 AM
โFeb-09-2021 11:40 AM
CharlesinGA wrote:Grit dog wrote:afidel wrote:
CURT 17132 is an option, though it's so much cheaper I have to question the quality.
??? Strange statement
Since its not really cheaper, I am not sure where this comes from. I looked up the Curt (11 holes), a similar but slightly shorter Blue Ox (9 holes), and an Equalizer (not sure on the holes, the pics do not reflect the actual item) and they are $222, $222, $239 respectively. The Equalizer is welded up, and I suspect may be taller (more holes) but does not list a weight rating. The Blue Ox and the Curt are both cast steel and the Curt is rated at 15K lbs and the Blue Ox is rated at 20K lbs, possibly due to not being as tall.
So no, the price does not vary wildly between brands and the Curt is in the same price range as the others. Some people may not like the cast steel but if properly manufactured, it is as strong as a welded up one.
Charles
โFeb-09-2021 07:11 AM
โFeb-08-2021 05:18 PM
Grit dog wrote:afidel wrote:
CURT 17132 is an option, though it's so much cheaper I have to question the quality.
??? Strange statement
โJan-28-2021 06:58 PM
Grit dog wrote:afidel wrote:
CURT 17132 is an option, though it's so much cheaper I have to question the quality.
??? Strange statement
โJan-27-2021 07:13 AM
mbopp wrote:
My F250 sits about 4" higher than my F150. I had enough drop to re-use the shank with a 2-1/2" to 2" Reese adapter.
โJan-27-2021 07:10 AM
afidel wrote:
CURT 17132 is an option, though it's so much cheaper I have to question the quality.
โJan-27-2021 07:08 AM
โJan-27-2021 06:42 AM
โJan-27-2021 05:23 AM
โJan-26-2021 07:24 PM