Apr-01-2019 11:15 AM
Apr-05-2019 03:23 PM
Apr-02-2019 09:56 AM
Grit dog wrote:
It's a gelcoat finish, correct? Not aluminum?
Either way, rotary polisher and rubbing compound and then polishing compound to remove the oxidation.
Or for a bit more than buying the polisher and supplies, have a detail shop cut and polish it, then cover it.
If you do it yourself, I'd expect a 38' camper side to take 2 FULL days.
Or you could hit it with the Zep floor polish for a temporary "fix."
Apr-01-2019 09:09 PM
Apr-01-2019 05:48 PM
JAC1982 wrote:
I should add covers are hard where we are too... it's very windy a lot and I'm not sure if a cover would stay put. Maybe it would?
Apr-01-2019 05:36 PM
Apr-01-2019 04:14 PM
Apr-01-2019 12:49 PM
Tyler0215 wrote:
Try some polishing compound on a small spot. That will take off the oxidized paint. Then apply a good wax .
If that works, you have a big job ahead.
Apr-01-2019 12:01 PM
Apr-01-2019 11:47 AM
Apr-01-2019 11:21 AM
Apr-01-2019 11:18 AM