Oct-30-2017 05:35 PM
Nov-08-2017 12:02 AM
jerem0621 wrote:Well some people are slow learners and need to be told more than once.
I think this is a good idea OP. Seems every answer on this forum ends with get a 3/4 Ton. Gets really really old.
Jeremiah
Nov-07-2017 07:32 PM
Nov-07-2017 06:37 PM
jerem0621 wrote:
I think this is a good idea OP. Seems every answer on this forum ends with get a 3/4 Ton. Gets really really old.
Nov-07-2017 02:39 PM
Nov-07-2017 01:08 PM
bucky wrote:
Make sure that V10 is the 3 valve version if you can find one.
Nov-07-2017 11:28 AM
Nov-07-2017 07:33 AM
Nov-02-2017 08:43 AM
Nov-01-2017 01:06 PM
Nov-01-2017 12:37 PM
Nov-01-2017 10:52 AM
Nov-01-2017 04:00 AM
Nov-01-2017 12:24 AM
Turtle n Peeps wrote:Huntindog wrote:
I don't mean to come across the wrong way..
Have you ever changed gears before?
It is pretty far above the skill level of the average wrench. Getting it wrong will mean a short life for the gears.
What special tools do you have to do the job?
Usually someone that has the ability to do this job, would also have enough knowledge to not need to ask a question about it online.
And yes, I have done it, but first I did many other things that were easier like motor/tranny builds etc.
LOL, I was going to ask the EXACT same questions!
Oct-31-2017 10:16 PM
Huntindog wrote:
I don't mean to come across the wrong way..
Have you ever changed gears before?
It is pretty far above the skill level of the average wrench. Getting it wrong will mean a short life for the gears.
What special tools do you have to do the job?
Usually someone that has the ability to do this job, would also have enough knowledge to not need to ask a question about it online.
And yes, I have done it, but first I did many other things that were easier like motor/tranny builds etc.
Oct-31-2017 09:33 PM