Jun-04-2014 07:42 PM
Jun-10-2014 12:27 PM
donsuefuggrwe wrote:Don, I looked at your pics and, I might be wrong, but it looks like something was applied to your finish that took the RMP off - I've NEVER seen any application look like that after a normal cleaning. We have to remember that RMP/Zep is a FLOOR finish, that's formulated only to stand up to 'damp mop' type cleaning. If you toss RMP or Zep on some fiberglass and then wash it down with a (compared to damp mop) fairly aggressive cleaning agent, it could be problematic. I've used RMP (the original, I still have three gallons left) on my Bounder since 2011, and just stripped it all off for the first time this spring. The key, as has been emphasized before, is GOOD PREP, a nice clean, wax-free surface, and three or more VERY LIGHT COATS.
Trying to post pictures of problem from Photobucket. Fist time I have tried to post. Red Max Pro was not used on the roof. Washed front and rear caps today and they are peeling also but not as bad as sides. Photos are of the right side of MH. http://s1288.photobucket.com/user/donaldclark1/library/?sort=3&page=1
Jun-05-2014 06:45 PM
Jun-05-2014 05:17 PM
Jun-05-2014 03:59 PM
Jun-05-2014 03:59 PM
Jun-05-2014 12:16 PM
Jun-05-2014 07:15 AM
Jun-05-2014 05:18 AM
Jun-04-2014 09:48 PM
Jun-04-2014 09:34 PM
Jun-04-2014 08:57 PM
Jun-04-2014 08:43 PM
Jun-04-2014 07:50 PM
Jun-04-2014 07:50 PM