โAug-08-2013 07:40 PM
โAug-11-2013 08:36 AM
โAug-11-2013 04:28 AM
โAug-10-2013 11:22 PM
jaycocamprs wrote:gamma3116 wrote:
I notice the pin box doesent move. It the body of the trailer. You can see were the body rubs on the pinbox as it teeters up and down, when it gets bad.
I would look at the frame around where the pinbox bolts up. This is a known problem area on Keystone 5'vers with Lippert frames. You should not have movement in this area.
โAug-10-2013 06:52 PM
gamma3116 wrote:
I notice the pin box doesent move. It the body of the trailer. You can see were the body rubs on the pinbox as it teeters up and down, when it gets bad.
โAug-10-2013 06:00 PM
gamma3116 wrote:I have a dodge 2011 3500 hd 4 wheel drive . The 5er is a alpine made by keystone its 39 ft . 2012 I travel with no water, the weight is 13, 500 lbs loaded, not maxed out. The hitch is located over the rear axle. When pulling the trailer the truck doesnt bounce up or down. I notice the pin box doesent move. It the body of the trailer. You can see were the body rubs on the pinbox as it teeters up and down, when it gets bad.
I would like to know how to slow down this teeter totter action I get while going down the road. It gets bad at times were the t.v. speakers will come loose from the cabinets. Any suggestions ?
โAug-09-2013 04:19 PM
โAug-09-2013 02:29 PM
โAug-09-2013 02:14 PM
โAug-09-2013 08:31 AM
โAug-09-2013 05:01 AM
โAug-09-2013 03:52 AM
โAug-08-2013 07:54 PM
โAug-08-2013 07:50 PM
Porsche or Country Coach!
If there's a WILL, I want to be in it!
โAug-08-2013 07:44 PM