Technical Issues
Having RV issues? Connect with others who have been in your shoes.
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Suspension Upgrades

I currently have the MorRyde CRE3000 and would like to upgrade and wet bolt my fiver. Has anyone studied or evaluated the MorRyde LRE/SRE4000, Dexter EZ Flex and Lippert EquaFlex systems as upgrade for price/value/effectiveness? LCI has a video com...

Bounder Classic 34B Tech Questions

I bought a 2014 Bounder Classic 34b and drove it home from the dealership in November (600 miles). On the way I noticed two things...1) the microwave rattles a lot and seems that the door maybe lose or something else near the hinges. I removed all ...

Water Heater problem

The last couple times I used my WH it had a weird odor. I can't really describe the odor but something akin to burning wires that burned your eyes. It's bad enough to make you shut it off and open the windows even tho it is 30°.Any ideas?Thanks.......

_DJ_1 by Explorer II
  • 3199 Views
  • 11 replies
  • 0 likes

Red/Green Propane Indicator Problem

The indicator is all red and won't go green either side with both tanks full. No gas getting to appliances. Tried the air purge thing with the stove but just burned off the last of the gas in the lines I think. Low flame on High, then no flame. No...

BFL13 by Explorer II
  • 9256 Views
  • 12 replies
  • 0 likes

I was wrong about everything! (Suspension problems, part 2)

We went on an expedition into town today, and got some real data.First stop, the scale. My rig, loaded for travel, is only a hair under the GVWR. Like a case or two of water, or a full gas tank, under.Next stop, my friend's trusted mechanic (not a ...

Naio by Explorer II
  • 7965 Views
  • 49 replies
  • 0 likes

Owan 4K circuit breaker?

This is sort of a pre problem question.Does a 2005 MH 4k have circuit breaker that needs to be hand reset if overloaded or is it an auto reset? If manual where is it? TYIA

visch1 by Explorer
  • 773 Views
  • 4 replies
  • 0 likes

HWH leveler repair on 99 Damon

We have a "new to us" 1999 Damon Intruder with HWH pivoting hydraulic leveling jacks. One of the jacks has a broken spring and therefore doesn't retract properly. I'm going to attempt to change the spring myself as well as replacing them all so I k...

Whats a Good Brand for a Inverter

Whats a Good Brand for a Inverter but not a Prosine, 2000 to 2500 watts, good quality low price..It appears my Procine 2.0 is my problem and from the complaints on Amazon and boating forums that use them all say they are high price junk..

timmac by Explorer
  • 10189 Views
  • 42 replies
  • 0 likes

Power Center smoking/melting help (WFCO 8955)

Thanks all for taking the time to read. I searched but couldn't seem to find anything but please feel free to direct me to another post on the subject that I missed. So last night I'm sitting up way past my bedtime typing emails for work in my trai...

Atwood Water Heater

We have an Atwood Gas/Electric model water heater in our 10-year old motorhome.Recently we have been having water dripping/spurting out of the blow-off valve opening when the water heater is in operation.Also, my wife said she didn't have very hot wa...

golfknut by Explorer
  • 6755 Views
  • 16 replies
  • 0 likes

Kohler 7CMZ21 Generator issues

Ok, my generator was running fine until 3 weeks ago. I've been on 15amp Shore Power for a few months. The volt meter on the battery with the converter running is showing 13.7 volts. Problem 1:I decided to test out some appliances on 50amp generator p...

2000 Watt Invertor Issues, Need Help

My 2000 watt Prosine invertor works fine on small loads like TV, computer, etc, but when I fire up my LG 1000 watt micro wave/convection oven the invertor kicks off after 8 seconds, my batteries are new with lots of amp hrs and solar panel, but why i...

timmac by Explorer
  • 8388 Views
  • 64 replies
  • 0 likes

Suburban Furnace Fan keeps running

1995 Fleetwood Bounder. Suburban furnace fan keeps running even after heat level is achieved and burner turns off. Need to shut unit off at thermostat until fan stops and then restart. Furnace works fine other wise. Does this sound like a thermostat ...