Technical Issues
Having RV issues? Connect with others who have been in your shoes.
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Great Service from TST on my TPMS

Two years ago, I purchased a TST 507 Flow Thru for my new FW. TST offered a three year warranty on the system. A few weeks ago, the system indicated I had a leak in one of the tires. I was surprised that the leak was actually coming from one of th...

Tundra Brake Controller Location

Just purchased a new to us 2010 Tundra double cab. Our old TV was a 2002 Tundra. The 02 had a perfect location for my prodigy P2 controller with a flat location to the lower right of the steering wheel. I drilled a small hole in the back for the wire...

marc71 by Explorer
  • 2641 Views
  • 15 replies
  • 0 likes

Convection Microwave

We have a 2014 fifth wheel with a Convection Microwave installed. There were no instructions on how to operate the Convection oven portion of the Microwave. It is a Frigidaire unit. Does anyone know of a book, or manual, on how to use one of these...

Bandaid by Explorer
  • 1014 Views
  • 5 replies
  • 0 likes

Cooler Unit Replacement - New or Refurbished?

My refrigerator went out. Propane and 120v produce heat but it doesn't cool. There is no sign of a leak.I think my cooling unit went out due to heat and lack of ventilation. I keep my RV in the California desert and run the refrigerator about 8 month...

Morningstar 30amp solar charger display

The digital display on my Morningstar PWM 30amp solar charger shows battery volts and amps. When the display reads 7amps is that telling me what the panels are producing or is it the amps that the batteries are accepting?thanks in advance for the hel...

Replacing Duo therm thermostat, need help.

I want to replace my analog thermostat with a Hunter model 42999 digital thermostat but the wiring colors are different. My Duo therm has, red, yellow, white, blue, orange, green. The hunter has terminals for Green, white, yellow, redh & redc with ju...

Shurflo pump switch!

I'm an Electrical Engineer, and have a bad pressure regulator switch on my Shurflo water pump.I looked all over the net to find the switch, but could only find the complete head assembly for over thirty bucks!I found the (almost) same switch at Allie...

Fredzo by Explorer
  • 1139 Views
  • 5 replies
  • 0 likes

surge protector newbie

I realize that this is a very basic electrical question but I am just a bit confused. I read that you can take a 30amp surge protector with a 50amp adapter and plug it into a 50amp pedistal plug to run a 30amp camper with no problem. I need to know...

What hose type to connect fresh water tanks?

Each of my two fresh water tanks has a large barbed fitting on the bottom measuring approximately 1 1/2" OD. They are connected with a 28" piece of Flexhaust PVC 1 3/8". It tore and sprung a leak at the hose clamp so today I went in search of a rep...

danojeno by Explorer
  • 1031 Views
  • 4 replies
  • 0 likes

Testing trailer brake controller....

Been working on this for days. I'm about ready to start screaming. (FYI, I am not in a good mood and any trolls looking to unload shaming or sarcasm or just generally embark on some kind of self-serving ego trip will be blocked immediately.) The fu...

cannesdo by Explorer
  • 4810 Views
  • 60 replies
  • 0 likes

Oooooooooo!!! Tekonsha Trailer Towing Teaser!

Vehicle Trailer Wiring Made Simple!Keep your expensive electrical system intact and at peak performance when wiring your vehicle to pull a trailer. Traditional harnesses require you to splice into your vehicle’s existing wiring. But the innovative ne...

Changing to LED's Need info

The overhead lighting in my 5th wheel, single and double fixtures with 1156 bulbs. Now am interested in converting to LED lighting bulbs.Need information as to what color temp (kelvin)and lumens (brightness) is the 1156 closely related to in the LED ...

Unknown inverter code flashing

Hi,I have a Xantrex Pro XM1000 inerverter in my class A. In the last couple of days it started flashing the code "AL1". This code isn't listed in the manual, so I have no idea what it means or how to clear it. The inverter appears to be functioning c...