Travel Trailer Group
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

So installed my new Upper bump stops, question...

I haven't had my camper on it yet, but when I take my next trip what's a good place to start as far as distance between my overloads touching my new bumps? Should they be just touching, buried a little into them or not quite touching? I have airbags ...

Area13 by Explorer
  • 1937 Views
  • 7 replies
  • 0 likes

BOV ????

How many of us consider or plan on our campers to be a (Bug Out Vehicle)? In the event of (something!!!!!!!) and you have to bug out long or short term Is your camper in that plan? Do you keep it ready to go and supply's ready to load? How many of us...

Metal Carport for Camper

Any recommendations for Carport Kits? Looking for something around 30x30 with 14' clearance. There are so many companies it is hard to find any differences. I'm located in Oregon but open to any company. Thanks.

Jfresh by Explorer
  • 7498 Views
  • 25 replies
  • 0 likes

Truck Camper Insurance in California

A question for you folks in California. Since in California the TC is not a vehicle, is it's insurance tied to your home owner's policy or the truck? Also, I saw some previous posts about towing being available for RVs with AAA in California. Is that...

svjim by Explorer
  • 2613 Views
  • 10 replies
  • 0 likes

Pass thru window leaking!

On recent trips, the first involving rain and the second involving snow, found the carpet below the pass-thru-window wet. After the second trip on snowy roads with lots of swirling wet snow, water and salt - specially when semi's passed with their o...

Creek Side vs. Black Rock

We are shopping for a new travel trailer and have narrowed down our search to 2 models: The Black Rock 19-B, the Creek Side 20-FQ. As far as I can tell, these models are virtually identical except for the exterior graphics and interiors. Both mode...

Buying a Used Diesel Truck

Hi,Question: If I'm buying a used diesel truck for towing our travel trailer then what should I look for when choosing the truck?Any warning signs:Is it a good idea to get a vehicle inspected and if so any recommendations. We live in San Diego but wi...

smcrea by Explorer II
  • 9312 Views
  • 49 replies
  • 0 likes

RV Cover for our Hybrid?

We just purchased a Rockwood Roo Hybrid. We live in South Florida and are concerned about the effect of the elements during outside storage. Any advice re rv covers? Good, bad, not worth the time? Considering an Adco cover but it's nearly $400...

Suncoast Torque Converters

Hey Gang, I just recently ordered a Suncoast Torque Converter for my Jeep, since mine is showing signs of letting go, which is common with the Jeep Diesels from 05 and 06. Jeep put a week converter in, and their "fix" for shuddering under load was t...

New GM truck tie-downs

Bummer, took Happi-jac tie-downs off the GMC and tried to put them on the new 2015 Chevy ... won't fit properly.Anyone have a solution here - I talked to the tech support at Happi-jac and they said it requires a new set-up, but when I look at it, it'...

monkey44 by Nomad II
  • 4169 Views
  • 13 replies
  • 0 likes

GM is going aluminum

According to an article in the Wall Street Journal Chevy and will GMC will going aluminum 4 years after Ford.http://finance.yahoo.com/news/gm-readying-aluminum-body-trucks-032223285.htmlIt will be interesting to see how this affects the debate on the...

Groover by Explorer II
  • 10391 Views
  • 67 replies
  • 0 likes

Looking at the Ascend 231BH.....??

Hi EveryoneMy family is looking to purchase a TT and need some opinions.We are looking to move up from a Pop Up we had several years ago. We are currently looking at the Evergreen Ascend 231BH model. It is a new "leftover" 2013. It meets all our n...

Bessie by Explorer
  • 1490 Views
  • 5 replies
  • 0 likes

Slide problem

AF 1150 2005.....just came back from rough 6,000 miles and it is really cold out (in the teens) , the slide will not close completely toward the rear... the front is flush but the rear is out about 1 1/2 inches. any ideas on how to fix or adjust or...